Industry Knowledge
Security guard radio communication: rules for clear, safe radio use
Security guard radio communication done right: plain language, call order, radio checks, emergency traffic and the rules to put in your post orders.

Security guard radio communication is how officers on a site ask for help, pass on what they see and stay in touch with a supervisor or dispatcher. Good radio use is short, clear and predictable: everyone knows who is talking, to whom, and what they need. This guide covers the habits to teach, the rules to write into your post orders and the mistakes that cause trouble on busy sites.
Key points#
- Every radio call should say who is calling, who it is for, where the officer is and what they need, in that order.
- Plain language is safer than private codes, especially on sites shared with other teams or when new officers join.
- Officers should do a radio check at the start of each shift and after changing batteries or channels.
- Emergency traffic must have one agreed phrase that clears the channel, and every officer must know it.
- The radio rules for each site belong in its post orders, and officers should be trained on them before their first shift.
Why radio habits matter#
A radio is often the fastest way for an officer to get help. When calls are long, unclear or full of chatter, the one call that matters can be missed or misunderstood.
Most problems are small habits: an officer who starts talking before pressing the button, a call with no location, a joke on the main channel during a busy event. Fixed early, these habits make every shift calmer. Left alone, they show up at the worst moment.
The parts of a good radio call#
Teach officers to build every call the same way, so the listener knows what is coming:
- Who it is for. Start with the person or post being called, such as dispatch or the lobby post.
- Who is calling. Then the caller's own call sign or post, such as the second rover.
- Where. The exact place, such as the north parking garage, upper level, by the stairwell.
- What. The situation in one or two short sentences.
- What you need. A clear request, such as sending another officer, calling emergency services or standing by.
Then the officer waits for an answer. If nobody answers, they call again, and if it is urgent, they use the emergency phrase.
Plain language or codes#
Many companies grew up with numbered codes. Codes can be quick, but they cause problems when officers are new, when two teams use different meanings, or when a code is heard by someone who does not know it, such as a police officer arriving on site.
Plain language avoids these problems. A plain sentence about a man with a knife at the main lobby is clearer than any code. If a client or site already uses codes, write the list into the site's post orders, keep it short, and make sure every officer on that site has read it.
Whatever you choose, use one system per site. A mix of codes from different employers is the most confusing option of all.
Radio checks and equipment#
Start every shift with a radio check: the officer calls the supervisor or dispatcher, and both confirm they can hear each other clearly. Repeat the check after changing a battery, switching channels or moving to a new building where reception may be weak.
Write down the basic equipment rules:
- Which channel each post uses, and which channel is for emergencies only.
- Where spare batteries and chargers are, and who checks them.
- Known dead spots on the site, such as basements and parking garages, and what to do there.
- What to do if a radio stops working: who to call by phone, and how the supervisor is told.
Add the dead spots to the guard tour plan too, so officers know where they will be out of contact during a patrol.
Emergency traffic#
Every site needs one agreed phrase that tells everyone to clear the channel at once. When an officer uses it, everyone else stops talking until the emergency is handled or the supervisor clears it.
Practice it. An emergency phrase that nobody has ever said out loud is easy to forget under stress. A short drill during onboarding, and again at least every few months, keeps it fresh.
After an emergency, the officer should file an incident report with the times, places and calls made while the memory is fresh. The radio traffic is part of the story.
Radio etiquette for every shift#
These are the habits supervisors should watch for and correct:
- Think, then press. Know what you will say before pressing the button, and wait a moment before speaking so the first word is not cut off.
- Keep it short. Long messages block the channel. Split them into short parts if needed.
- No names or personal details on open channels. Use descriptions or ask for a phone call when private information is involved.
- No chatter. The work channel is for work. Jokes and personal talk belong elsewhere.
- Confirm what you heard. Repeat key details, such as a location or a plate number, back to the caller.
- Stay calm. A steady voice helps the listener understand and helps the caller think.
Putting the rules in writing#
Radio rules only work if every officer knows them. Put each site's call signs, channels, codes (if any), dead spots and emergency phrase in its post orders, and have officers acknowledge them before their first shift there.
Then train on them. A short training course with a few questions on the emergency phrase and the call order shows who has learned the rules and who needs another look.
Frequently asked questions#
What is the right way to make a security radio call?#
Say who the call is for, who is calling, where you are, what is happening and what you need, in that order. Keep it short, and wait for an answer before saying more.
Should security guards use 10-codes or plain language?#
Plain language is usually safer because everyone understands it, including new officers and police arriving on site. If a site uses codes, keep the list short, write it into the post orders and make sure every officer has read it.
How often should security officers do a radio check?#
At the start of every shift, and again after changing a battery or channel, or after moving into a building with weak reception.
What should a guard do if their radio stops working?#
Tell the supervisor right away by phone, move to a spot with better reception if it is safe, and follow the site's written backup plan for lost contact.
- Operations
- Officer safety
- Training