Skip to content

Industry Knowledge

Security guard pass-down log: how to hand over a post at shift change

A security guard pass-down log keeps open issues from getting lost at shift change. What to write in it, how to run the handover and what to leave out.

A security guard pass-down log is the written handover between the officer leaving a post and the officer taking it over: what is still open, what changed during the shift and what to watch next. A good one takes a few minutes to write and read, and it keeps problems from falling into the gap between two shifts. This guide covers what to put in it and how to run the handover itself.

Key points#

  • A pass-down log is a short written handover from the outgoing officer to the incoming officer at the same post.
  • It should list open issues, equipment, access changes, site conditions and anything promised to the client or to visitors.
  • An incident goes in its own incident report; the pass-down log only points to it.
  • The incoming officer reads the log, asks questions and acknowledges it before the outgoing officer leaves.
  • Supervisors should read pass-down logs regularly and fix the problems that keep coming back.

Why shift handovers go wrong#

Most handover problems are small. The night officer knows that the loading dock door does not latch, but the morning officer never hears it. A tenant asked for a delivery to be let in at noon, and the request leaves with the officer who took it.

Spoken handovers fail most often when they are rushed. The relief officer is late, the outgoing officer is tired, and the details that mattered at two in the morning sound minor at the end of the shift. A written log does not depend on anyone's memory.

The client feels the gap too. When a property manager mentions a request made to yesterday's officer and today's officer has never heard of it, the client does not see two people. They see one company that forgot.

What to write in a pass-down log#

Keep the log short and specific. Each entry should tell the next officer something they need to act on or watch. These are the parts most posts need:

  • Open issues. Anything that started during the shift and is not finished: a follow-up call, a person who was asked to leave and may come back, a report still being written.
  • Equipment. Keys, access cards, radios, phones and any vehicle, with their condition. Count shared keys and cards with the incoming officer, not alone.
  • Access changes. Visitors, contractors and deliveries expected on the next shift, and anyone who is no longer allowed on site.
  • Site conditions. Doors that do not lock, lights that are out, alarms in test or service, construction areas, wet floors and anything else that changes the patrol.
  • Client requests. Instructions from the client or the property manager during the shift, with the name of the person who gave them.
  • Patrol notes. Checkpoints that could not be reached and why, and anything unusual seen on rounds.
  • Post order changes. Any new or changed instruction the next officer must follow, and where to read it in full.

End each log with the outgoing officer's name and the time the post was handed over. The incoming officer then adds their name to show they read it.

What to leave out#

A pass-down log is not a diary of the shift. Routine rounds with nothing to note do not need a line each; the patrol record or the daily activity report already holds them.

It is also not the place for an incident report. If something happened that needs a full account, write it in the incident report and put one line in the log that points to it, such as a note that a trespass report was filed.

Leave out opinions about people, guesses about who did what and complaints about coworkers. Logs can be read by supervisors, clients and sometimes lawyers, so write only what you saw, heard and did.

How to run the handover, step by step#

A written log works best inside a simple routine that every officer follows at every post.

  1. Write the log before the end of the shift. The outgoing officer should not start writing when the relief walks in. Fill it in during the last part of the shift, while the details are fresh.
  2. Meet at the post. The incoming officer arrives and clocks in at the site. The outgoing officer stays on post until relieved; a post should never be left empty between shifts.
  3. Walk through the open items together. Talk through the log out loud, hand over keys and equipment, and count them together. If a door or alarm needs explaining, go and look at it.
  4. Let the incoming officer ask questions. Anything unclear gets answered now, while the person who knows the answer is still there.
  5. Acknowledge the log. The incoming officer signs or marks the log as read. Only then does the outgoing officer leave.

If the relief does not arrive, the outgoing officer calls the supervisor and follows the company's late-relief rule, not their own judgment. That rule belongs in the site's post orders.

Handover minutes are work time. How they are paid, and how they affect overtime, depends on federal and state wage rules, so check with an attorney or your state labor agency and build the handover into the schedule.

What supervisors should do with the logs#

Pass-down logs are one of the best early warnings a supervisor has. Read them regularly, not only after a complaint.

Look for patterns. The same door left open every weekend, the same light out for a week or the same visitor turned away three nights running are problems to fix with the client, not notes to copy forward forever.

Close the loop. When the client fixes the lock or changes an instruction, make sure the next log says so, and update the post orders if the change is permanent.

Use the logs in training, too. A good handover from an experienced officer is a better example for a new hire than any written rule.

Paper or digital#

Many posts still keep the log in a binder at the desk. It works if officers use it, but a binder can be lost, filled in late or read only by whoever is on site.

A digital log lets supervisors read handovers from the office and keeps a record that cannot be torn out. In Guardix, companies build their own report forms from headings, text boxes, checkboxes, dates, times, signatures and file uploads, and choose which sites use each form, so a pass-down form with a checkbox for each set of keys and a signature for the incoming officer can be one of them. Officers file reports in the mobile app while they are clocked in to their shift.

Whatever you use, keep the format the same at every post. Officers who move between sites should never have to learn a new handover.

A simple pass-down entry#

Here is the kind of entry that gives the next officer what they need:

  • Loading dock door does not latch. Client has called a locksmith; check it on every round until fixed.
  • Contractor expected at the main gate in the morning for roof work. Name is on the visitor list.
  • Former tenant was asked to leave the lobby tonight. Trespass report filed, see report.
  • Keys: all sets present and counted with the incoming officer.
  • Post orders updated: parking garage now locks at midnight.

Frequently asked questions#

What is a pass-down log in security?#

A pass-down log is the written handover an outgoing security officer leaves for the incoming officer at the same post. It lists open issues, equipment, access changes, site conditions and client requests, so nothing important is lost at shift change.

What should a security pass-down log include?#

It should include open issues, the status of keys and equipment, expected visitors and banned persons, site conditions such as broken locks or alarms in test, client instructions, patrol notes and any change to the post orders. It should point to incident reports rather than repeat them.

Should the incoming officer sign the pass-down log?#

Yes. The incoming officer should read the log, ask questions and then sign or mark it as read before the outgoing officer leaves. That shows the handover happened and who took responsibility for the post.

How long should a security shift handover take?#

A handover usually takes a few minutes, longer when there are open issues or equipment to count. Plan that time into the schedule instead of squeezing it in, and check with an attorney or your state labor agency on how handover time is paid.

Back to all news